Discount
How to get a discount? Check on Facebook!
English
OK
Save material, time and money with

TonCut is intended for cutting optimization of flat (2D) and long (1D) materials, such as: glass, wood, stone, metal, aluminum, plexiglass, cardboard, tubes, bars, etc.

Fast, efficient and easy to use program for cutting optimization.

Free download
Try for free!

Find out more...

News

  • TonCut 7 - 7.1.435.6603

    11/21/2019 04:50:03 AM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • Fixed error that could cause notifications about the new version of the program not being displayed.
    • Fixed error that caused a problem with reactivation of the DEMO license.
  • TonCut 7 - 7.1.430.6585

    11/04/2019 06:28:15 PM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • Filtering results - filtering includes waste resulting from the kerf.
    • Filtering results - we have added the option to choose whether usable waste should be considered.
    • Configuration window - selection of dimensional accuracy is now more intuitive.
    • DXF export - fixed error which caused the pieces to be positioned incorrectly if the rotation or the mirror image was used.
    • PLT export - we have changed the way scale is defined. Now the resolution is given.
    • Fixed error which could cause margins to be distorted when editing sheet data.
    • We have improved support for working on multiple monitors.
  • TonCut 7 - 7.1.414.6500

    08/27/2019 08:45:38 AM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • The program has been adapted to monitors with high resolution. It also correctly supports High-DPI mode in Windows 10.
    • Error causing the printouts to occupy only a small part of the page has been corrected.
    • We have significantly accelerated the algorithm for determining cuts.
    • We have corrected the error which could cause occurrence of duplicate of materials, devices and veneers.
    • We have corrected the error which could cause program suspension when adding standard sheet dimensions.
    • DXF – layer with the description of pieces can be now printed.
    • DXF – we added the possibility to change the name of layer with the described pieces.
    • We increased the accuracy of statistics (length and surface) up to 3 decimal places.
    • We have refreshed the look.
  • TonCut 7 - 7.1.320.6020

    03/28/2019 09:29:14 AM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • New option has been added to determine what size (net or gross) is to be cut out.
    • Thickness of a veneer can be zero now.
  • TonCut 7 - 7.1.317.6007

    03/20/2019 08:37:41 AM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • Default margins support has been restored. Now you can set the default margins for each material separately.
    • Support for standard sheet sizes has been rebuilt. Now the standard sizes are set for each material separately.
    • Tables on the printouts now contain gross dimensions.
    • Labels now contain gross dimensions.
    • Printouts have been optimized to make the best use of a sheet of paper. Tables can now change their position and width so that the sheet schema is as large as possible.
    • Fixed error that could have caused the program to crash when trying to save the results if they were previously filtered.

    Old plugins will not work with this version of TonCut. Please upgrade all plugins you use.

  • TonCut 7 - 7.1.310.5776

    02/20/2019 04:22:05 PM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • A configuration wizard has been added. It adjusts the program settings to the needs of the user, industry and computer power. The wizard opens automatically when you start the program for the first time. It can also be opened manually in the optimization profiles window by pressing Restore defaults.
    • Optimization acceleration. In some cases, optimization can be up to 50 times faster. In particular, it refers to optimization of 1D materials and 2D when there are many sheets optimized.
    • Fixed error that could cause the program to crash on computers with more processor cores.
    • Fixed error that resets IDs of added pieces and sheets.
  • TonCut 7 - 7.1.209.5545

    02/15/2019 08:14:39 AM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • CSV import: added option to indicate if the dimensions are gross or net.
    • CSV import: if material thickness is available, the list of materials only shows the matching ones.
    • CSV Import: fixed error that could cause the program to crash if one of the materials was not assigned.
    • CSV Import: fixed error that could cause the program to crash if one of the dimensions was not a correct number.
    • The list of pieces shows gross dimensions now.
    • The Start button is always active now.
    • Fixed error in the piece data window that caused a wrong dimension calculation if the units used were different than millimeters.
  • TonCut 7 - 7.1.204.5536

    02/13/2019 07:49:45 AM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • Option to enter dimensions of a piece as net or gross value.
    • Fixed error that allowed creating many devices, materials and veneers with the same name.
    • Fixed error that could cause incorrect assignment of the materials to the devices during import (of materials and devices) from the SSI file.
  • TonCut 7 - 7.1.173.5488

    02/07/2019 10:04:45 AM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • Veneers - veneer thickness added.
    • Veneers - information on the material thickness has been added.
    • Printouts - in order to increase visibility, the veneers are now marked in blue.
    • At the first installation, the program configuration is now matched to the speed of the computer.
    • Option to restore default search profiles has been added.
    • Fixed error that could have caused a wrong calculation of cuts. The consequence of this error was the lack of cut numbers on the printouts. The program could also understate the total number and length of cuts.
    • Printouts - fixed error that caused lack of dimensioning of the main cuts if the sheet had margins.

    Old plugins will not work with this version of TonCut. Please upgrade all used plugins.

  • TonCut 7 - 7.1.166.5386

    01/25/2019 02:11:18 PM

    We are pleased to inform you about the new TonCut 7 version. The new version includes the following changes:

    • Support for 1D materials.
    • Completely new result printout:
      • we have corrected the problem with the mirror image of the outline,
      • better use of space depending on whether we print horizontally or vertically,
      • highlighted information about the number of copies of a given sheet.
    • Option to change best result criterion.
    • Option to change order of printout of labels.
    • Limitation of cut length and width as separate device parameters - limitation of a strip width useful when cutting in strips.
    • Completely new sheet data window.
    • Information about consumption of materials and veneers on the results screen.
    • We have arranged the statistics on the printouts and in the program.
    • We have removed the results summary printout.
    • Option to turn off the surplus in material parameters.
    • We have added protection against the loss of entered data.

    Old plugins will not work with this version of TonCut. Please upgrade all used plugins.

Our customers in Poland

Below is a map of randomly selected companies using TonCut in Poland.

Map of customers

Our customers all over the world

TonCut is also known around the world. Below is a map of randomly selected customers around the world.

Map of customers

At the beginning there was the Super Glazier...

The Super Glazier was created in 1997. Its goal was to optimize glass sheet cutting. It was popular for its simplicity, speed and efficiency. Soon, it turned out that not only do the glaziers have difficulties with cutting optimization. Then, however, certain obstacle occurred: a kerf – waste caused by the cutting device.

Birth of the TonCut

After adding the kerf support to the program, we came to a conclusion that the application could no longer be called Super Glazier. Since then it has simply become a universal, multi-industry application. Thus, TonCut was born and it was in 2005.

TonCut today

Today TonCut is used by over 700 companies across Poland. The application is constantly being developed and gains new users. Among the companies using TonCut are Scania Production Słupsk SA, FAKRO GP Sp. z o.o., WMG GROUP LTD, ProLicht Reklama sp. z o.o., Eljako-Al Sp. z o.o., NordGlass II Sp. z o.o., Kronospan HPL Sp. z o.o., Tabal S.J., ZUGIL S.A., and many others.

Like us on Facebook
Newsletter sign up