Discount
How to get a discount? Check on Facebook!
English
OK
Save material, time and money with

TonCut is intended for cutting optimization of flat (2D) and long (1D) materials, such as: glass, wood, stone, metal, aluminum, plexiglass, cardboard, tubes, bars, etc.

Fast, efficient and easy to use program for cutting optimization.

Free download
Try for free!

Find out more...

Program can't find any proper result! What should I do?

  1. Check if sheets are big enough to contain the smallest pieces.
  2. If you use an ornament, make sure that the pieces match the sheets in this respect. If the sheets do not have any ornament and the pieces do, program will not find any result.
  3. Remember that a kerf also takes some space on the sheets. If your pieces have dimensions close to the size of the sheets, switch the Allow cuts on edges of the sheet option.
  4. If your pieces have dimensions close to the size of the sheets, remember about minimal width of cutting. This means that the sheet must have width at least the same as the piece, plus the kerf, plus minimal width of cutting.
  5. Cut depth limit is switched on. Make sure that it is possible to set pieces to fit the sheet. Take the ornament, size of the pieces and direction of the first cut into account.
  6. Sheets have set margins, which requires consideration of cut depth limit in the configuration. In such situation you must remember about the necessity of doing additional margin cuts. In practice this means, that if you want to cut in strips, the cut depth limit has to be set to 3 or 4 cuts, not 2. The exact value depends on the margin quantity and method of cutting them off.
  7. Cut length limit is switched on. Make sure, that it is possible to put pieces in a way that cuts won't be longer than the set limit.

Like us on Facebook
Newsletter sign up